Bar arrangement: Shown below are the six standard types of SSG’s gratings preferred by the industry which have been developed to comply with applications and safety requirements worldwide. This will give our customers the opportunity to choose the ideal type of flooring to match their load requirements as closely as possible. Other bar arrangements may be available depending on quantity required; pleased contact our sales office for any further information.

Designation:
Each of SSG’s grating products is coded for easy identification as shown in the following example.



Finishes:
The following finishes are available:

• Self Color for quicker delivery to customers who fabricate their own flooring

• Galvanized for corrosive and damp locations. Gratings are galvanized to BS 729, giving a minimum average zinc coating of 610 g/sq.m. for sections of 5 mm and above and 460 g/sq.m. for sections of below 5 mm. Gratings can also be galvanized to conform to ASTM 123, giving a minimum average zinc coating of 610 g/sq.m. for sections of 5 mm and above and 550 g/sq.m.

How to order:
When ordering gratings and stair treads, please specify:

• Grating code (For example: SA 255/40)

• Bearing bar type (Plain or Serrated)

• Size of banding bars, if banding bar is required. Non-standard welding on banding bar must be noted too.

• Quantity and size of panels required; please supply drawings (if available) showing
  – All dimensions
  – Bearing bar direction
  – Section size and location of support steel
  – Location and size of cutouts and removable areas
  – Location and size of kickplate, nosing and splices at penetrations

• Finish (Self Color or Galvanized)

• Type of fixing clips needed. Clips will be provided on the basis of four sets per panel.

For treads, please specify the type required, grating type, quantity, dimension and finishing.

Back

©2000 Siam Steel Gratings Co., Ltd.