 |
Fixing methods:
SSG’s gratings can be fixed on the
supporting members by the steelwork erector with
clips or tack welding.
Please note, that, in case there should not be
any lateral restraint provided by the support
structure, a minimum of four clips per panel must
be used to restrain floor panels. If larger
panels are to be fixed, it is advisable to use
extra clips on any available intermediate
supports.
|
 |
| Clip ref. SC 1:
A pressed steel saddle clamp constructed
in such a way that fixing is possible
from above. |
|
| Clip ref. SC 2:
Stud bolts are centered between two main
bars and welded to supporting members. A
pressed top clip engaging two main bars
is placed over stud bolt and then hex nut
is tightened. |
|
| Tack welding:
This is the best fastening method. The
gratings are field-welded to support. |
|
Recommended bolts for clips:
| Depth
of Bearing Bar |
Length
of Bolt |
| SC 1 Type |
SC 2 Type |
| 20 mm. - 25 mm. |
45 mm. |
Subtract 5 mm. from depth
of bearing bar |
| 30 mm. - 45 mm. |
65 mm. |
| 50 mm. - 65 mm. |
80 mm. |
HOW TO ORDER:
When ordering clips, please
specify the following: |
| |
| |
TYPE
OF CLIP | BEARING BAR PITCH | SIZE OF
BOLT & NUT |
FOR EXAMPLE: |
SC1/30/M8 x 45 bolt & nut |
MEANING: |
Clip type ‘SC1’ for gratings
with a bearing bar pitch of 30 mm and
fixing with M8 x 45 bolt & nut |
|
©2000 Siam Steel
Gratings Co., Ltd.
|
